Rane Factory Store

The 12" vinyl record has a Serato exclusive and unique control signal which allows Scratch LIVE to track the motion of the record, simulating the same movement with digital audio. This second edition (CV02) works with software versions 1.2 and higher. Software may be downloaded from scratchlive.net.

Side A: 10 minutes plus vinyl select area. Side B: 15 minutes.

Package of 2 Scratch LIVE Control CDs.

• Made for use with Scratch LIVE on the MacBook.
• Customized keyboard layout set for optimal command control.
• Protects against dirt, spills, dust, and key wear.
• Non-obstructive typing; Easy to install, clean and replace.
• Click image at left for close-up.

• Made for use with Scratch LIVE on the MacBook Pro.
• Customized keyboard layout set for optimal command control.
• Protects against dirt, spills, dust, and key wear.
• Non-obstructive typing; Easy to install, clean and replace.
• Click image at left for close-up.

The RaneGain test set is a handy tool kit based on techniques first developed by Pat Brown of Syn-Aud-Con for use in quickly setting sound system gain controls. Using the RaneGain pair makes setting level controls a snap.

Comprised of a precision 400 Hz sine wave generator and a matching piezo transducer, the test set makes use of the Fourier principle that all periodic waves can be broken down into a sum of pure sine waves. If a pure 400 Hz tone is the source in a system, and the system is turned up until clipping, then what comes out is the 400 Hz fundamental, plus a whole string of predominately odd-order harmonics. Spectrum analysis of the output will show the 400 Hz fundamental, plus strong harmonics at the odd harmonic intervals of 1.2 kHz, 2 kHz, 2.8 kHz, 3.6 kHz, 4.4 kHz and so on. The RaneGain Transducer is a piezo tweeter designed to reproduce mid-to-high audio frequencies, so while it doesn't reproduce the 400 Hz fundamental worth a hoot, the harmonics make it scream (so loud it Hz).

The FT 45 Crossfader is a replacement 45 mm fader for the TTM 52, TTM 52i, TTM 54 and TTM 54i mixers only. It will not work in any other Rane mixer. It may replace either of the two channel faders or the crossfader.

The F 45 Crossfader (45 mm) may be used to replace the longer 60 mm crossfader on the Rane MP 24z, MP 22z or MM 8z Mixers as well as the 60 mm crossfader on the Rane XP 2016 or XP 2016a. This part will not work on any other Rane product. This part can be "hot-swapped" which means the mixer may be operating while the transplant is performed.

The F 60 Crossfader (60 mm) may be used to replace the standard 60 mm crossfader or the optional F 45 (45 mm) crossfader on the Rane MP 24z, MP 22z or MM 8z mixers, as well as the standard 60 mm crossfader on the Rane XP 2016 and XP 2016a. This part will not work on any other Rane product. This part can be "hot-swapped" which means the mixer may be operating while the change is made.

The F 60X Crossfader (60 mm) may be used to replace the crossfader on the Rane XP 2016S. This part will not work on any other Rane product. This part can be "hot-swapped" which means the mixer may be operating while the change is made.

This switch is a replacement for the transform switches on Rane models TTM 52i, TTM 54i and TTM 56. It does not work with the original TTM 52 or TTM 54 (non-i) versions.

These custom TTM 56 panels are made from the same Lexan-on-steel that the stock factory black panels are made from. Comes with four mounting screws (in case the existing screws get lost). Installation is easy: just pull the knobs, remove four screws then lift the existing panel. Reverse the process to install the new panel, and your TTM 56 will have new tats.

• Blue = Pantone 2935
• Red = Pantone 7427
• Purple = Pantone 228
• Gold = Pantone 874
• Silver = Pantone 877

Quantity

Select color

Click to add to cart

1 2 3 4 5 6 7 8 9

This case is designed to accomodate any of Rane's performance mixers. These include the Empath, TTM 56, TTM 57SL, TTM54i and TTM52i. There's added space beneath the mixer for headphones, cables, phono cartriges and other small items. The case measures 9.25" x 12" x 16" (23.5 x 30.5 x 40.5 cm). Shipping weight is 13 pounds (6 kg). Limited quantities!

Quantity

Click to add to cart

1 2 3 4

This case is designed to accomodate any of Rane's performance mixers. These include the Empath, TTM 56, and TTM 57SL. The TTM 56 uses the included foam spacer. There's added space beneath the mixer for headphones, cables, phono cartriges and other small items. The case measures 7.5" x 15.75" x 19.75" (19 x 40 x 50 cm). Shipping weight is 14 pounds (6.35 kg), unboxed and empty is 10 pounds (4.53 kg).

Quantity

Click to add to cart

1 2 3 4

This black T-shirt is screened on the front with the red strobe logo and 'Scratch LIVE' in small print. The back has the Serato and Rane logos (cursor over to view the back). Choose your shirt size below.

This Rane DJ T-shirt is available in white. The back reads "My Rane mixer can beat your mixer" (cursor over to view the back). The front has a small Rane logo and a TTM 56-style crossfader graphic. Choose your shirt size below.

Rane "Live Sound" T-Shirt

This Rane DJ T-shirt is available in black. The back reads "YES I KNOW WHAT EVERY KNOB DOES" (cursor over to view the back). The front has a small Rane logo and reads 'Professional Audio Products.' Choose your shirt size below.